Pinball Side Buttons:
Pinball Side Buttons (this option is not available with the “Tankstick Edition” cabinet):
ABOUT: When you order the pinball buttons, your controller will include the extra wires needed to install the buttons already attached. You will need to plug the wires into the buttons and screw the pinball button housings shown in the image below to the sides of the cabinet. See video at the following link for easy-to-follow instructions: https://youtu.be/mR_6odbhj_Q
Cabinet fits most 32" standard VESA mount flat screen monitors/TVs. We recommend purchasing a display where the ports are located on the side or bottom as opposed to the back of the display for easier installation.
We include four 30mm M4 screws/washers. If your monitor/TV requires different length screws, you will have to source them from your local hardware store.
If your ports are on the back, you will need longer screws and nylon spacers to create a gap for your cables between the back of your display and the mount. You will also need a 90 degree HDMI or DisplayPort adapter. You can find these products here:
M4 x 55mm Screws:
90 Degree HDMI Adapter:
90 Degree DisplayPort Adapter:
Logitech Multimedia 2.1 Speakers Z213
This is a good choice for simple set up as all necessary parts are included (plus you also get a subwoofer). You can use any similar computer speakers, it doesn't necessarily have to be this exact model.
You can simply place these in the marquee area and leave them loose or you can secure them with velcro or some other method if you like.
BOSS Audio Systems BRS40 50 Watt, 4 Inch Speakers
These speakers are an exact fit for the holes in the speaker panel. They will screw into the pre-drilled pilot holes on the back of the speaker panel (this should also apply to any other 4" speakers).
BOSS Audio Systems BRS52 60 Watt, 5.25 Inch Speakers
These speakers will also fit although they overlap the speaker holes a bit. They will not align with the pre-drilled pilot holes for the screws so you will have to drill your own holes for the four corner mounting screws.
NOTE: you will need a small amp such as this one and speaker wire to go along with the speakers above.